CPH5706 no.7025-1/5 features ? composite type with a pnp transistor and a schottky barrier diode contained in one package facilitating high-density mounting. ? the CPH5706 consists of two chips which are equivalent to the cph3115 and the sbs006, respectively. ? ultraminiature package facilitates miniaturization in end products.(0.9mm) specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit [tr] collector-to-base voltage v cbo --30 v collector-to-emitter voltage v ceo --30 v emitter-to-base voltage v ebo -- 5 v collector current i c --1.5 a collector current (pulse) i cp -- 3 a base current i b --300 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 0.9 w junction temperature tj 150 c storage temperature tstg --55 to +125 c [sbd] repetitive peak reverse voltage v rrm 30 v non-repetitive peak reverse surge voltage v rsm 30 v average recified current i o 0.7 a surge current i fsm 50hz sine wave, 1cycle 10 a junction temperature tj --55 to +125 c storage temperature tstg --55 to +125 c sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn7025a gi im o2203 ts im ta-100919 / 92001 ts im ta-3288 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. CPH5706 tr : pnp epitaxial planar silicon transistor sbd : schottky barrier diode dc / dc converter applications
CPH5706 no.7025-2/5 electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit [tr] collector cutoff current i cbo v cb =--30v, i e =0 --0.1 m a emitter cutoff current i ebo v eb =--4v, i c =0 --0.1 m a dc current gain h fe v ce =--2v, i c =--100ma 200 560 gain-bandwidth product f t v ce =--10v, i c =--300ma 450 mhz output capacitance cob v cb =--10v, f=1mhz 9 pf collector-to-emitter saturation voltage v ce (sat) i c =--750ma, i b =--15ma --250 --375 mv base-to-emitter saturation voltage v be (sat) i c =--750ma, i b =--15ma --0.85 --1.2 v collector-to-base breakdown voltage v (br)cbo i c =--10 m a, i e =0 --30 v collector-to-emitter breakdown voltage v (br)ceo i c =--1ma, r be = --30 v emitter-to-base breakdown voltage v (br)ebo i e =--10 m a, i c =0 --5 v turn-on time t on see specified test circuit 30 ns storage time t stg see specified test circuit 115 ns fall time t f see specified test circuit 30 ns [sbd] reverse voltage v r i r =0.5ma 30 v v f 1i f =0.3a 0.35 0.40 v forward voltage v f 2i f =0.5a 0.42 0.47 v v f 3i f =0.7a 0.5 0.55 v reverse current i r v r =10v 200 m a interterminal capacitance c v r =10v, f=1mhz 20 pf reverse recovery time t rr i f =i r =100ma, see specified test circuit 10 ns marking : pf package dimensions electrical connection unit : mmm 2156 switching time test circuit t rr test circuit [tr] [sbd] 1 : cathode 2 : collector 3 : base 4 : emitter 5 : anode sanyo : cph5 1.6 0.6 0.6 2.8 0.2 2.9 0.05 0.4 0.95 0.2 0.9 0.7 0.15 0.4 12 3 4 5 54 3 12 1 : cathode 2 : collector 3 : base 4 : emitter 5 : anode top view + + 50 w input output v r r b r l v cc = --12v 220 m f 470 m f 10 m s v be =5v pw=20 m s i b2 i b1 d.c. 1% 50 w 100 w 10 w t rr 10ma 100ma 100ma --5v duty 10% --20i b1 = 20i b2 = i c = --750ma
CPH5706 no.7025-3/5 collector current, i c -- a h fe -- i c dc current gain, h fe 1000 7 5 3 2 10 23 57 --0.01 --1.0 --0.1 23 57 23 100 7 5 3 2 v ce = --2v --25 c 25 c ta=75 c collector current, i c -- a f t -- i c gain-brandwidth product, f t -- mhz 1000 3 2 5 7 23 57 23 2 57 --0.01 --1.0 --0.1 100 3 2 5 7 3 2 v ce = --10v it03025 it03030 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 100 7 5 3 2 7 5 3 2 10 23 57 0.1 1.0 23 57 10 23 5 collector current, i c -- a v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- v --1.0 7 5 3 2 --0.01 23 57 --0.01 --1.0 --0.1 23 57 23 --0.1 7 5 3 2 i c / i b =20 --25 c 25 c ta=75 c it03029 it03026 f=1mhz --2.0 --1.0 --1.8 --1.6 --1.4 --1.2 --0.8 --0.6 --0.4 --0.2 0 i c -- v ce 0 --0.2 --0.1 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 collector-to-emitter voltage, v ce -- v collector current, i c -- a base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 v ce = --2v --25 c 25 c ta=75 c it03023 it03024 --50ma --40ma --30ma --20ma --10ma --2ma --4ma --6ma --8ma i b =0 collector current, i c -- a v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- v 2 23 57 --0.01 --0.01 --1.0 --0.1 23 57 23 i c / i b =50 75 c 25 c ta= --25 c --1.0 7 5 3 2 --0.1 7 5 3 2 collector current, i c -- a v be (sat) -- i c base-to-emitter saturation voltage, v be (sat) -- v --10 7 5 3 2 --0.1 23 57 --0.01 --1.0 --0.1 23 57 23 --1.0 7 5 3 2 i c / i b =50 ta= --25 c 75 c it03027 it03028 25 c [tr] [tr] [tr] [tr] [tr] [tr] [tr] [tr]
CPH5706 no.7025-4/5 ambient temperature, ta -- c p c -- ta collector dissipation, p c -- w 1.4 0 0.2 0.4 0.6 0.8 0.9 1.0 1.2 0 20 40 60 80 100 120 140 160 collector-to-emitter voltage, v ce -- v a s o collector current, i c -- a 2 3 5 7 2 3 5 7 2 3 5 7 --10 --1.0 --0.1 --0.01 23 57 23 57 23 57 --0.1 --1.0 --10 --100 ta=25 c single pulse mounted on a ceramic board(600mm 2 5 0.8mm) dc operation 100ms 10ms 500 s 100 s i cp = --3a i c = --1.5a it03031 it03032 1ms mounted on a ceramic board(600mm 2 5 0.8mm) it03033 forward voltage, v f -- v it03034 it03035 100 7 5 3 2 7 5 3 2 7 5 3 2 7 5 3 2 10 1.0 0.1 0.01 i r -- v r 0 5 10 15 20 25 30 reverse voltage, v r -- v reverse current, i r -- ma 100 c 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 p f (av) -- i o 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 average rectified current, i o -- a average forward power dissipation, p f (av) -- w (1) (2) [sbd] [tr] [tr] [sbd] (4) (3) ta=125 c 50 c 75 c 25 c 1.0 0.1 0.01 i f -- v f 0 0.2 0.4 0.6 forward current, i f -- a ta=125 c 25 c 2 7 5 3 2 7 5 3 2 [sbd] 75 c 50 c 100 c (1)rectangular wave q =60 (2)rectangular wave q =120 (3)rectangular wave q =180 (4)sine wave q =180 sine wave 180 360 rectangular wave q 360
CPH5706 no.7025-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of october, 2003. specifications and information herein are subject to change without notice. ps
|
